Crusader Model 350 - 454 C.I.D/7.4L Intake Manifold Assembly
Mark-4 Block With 2-Piece Rear Seal
Serial #'s up to 88710
| Ref # | Part # | Description | Quantity | |
| LH | RH | |||
| 1 | 20231 | Elastic Stop Nut, 1/4-20 | 1 | 1 |
| 2 | 103339 | Washer, 1/4 Flat | 1 | 1 |
| 3 | 97916 | Decal, Flame Arrestor | 1 | 1 |
| 4 | 33628 | Flame Arrestor; Tall Stack, Dual Vent | 1 | 1 |
| 5 | 20806 | Hose 5/8 " Heater | 2 | 2 |
| 6 | 97969 | Stud, Flame Arrestor Tall Stack Mounting | 1 | 1 |
| 7 | 21025 | Ball Joint Assembly | 1 | 1 |
| 8 | 102634 | Nut, 5/16-18 Hex | 4 | 4 |
| 9 | 103320 | Washer, 5/16 Medium Lock | 4 | 4 |
| 10 | 103340 | Washer, 5/16 Flat | 4 | 4 |
| 11 | 45356 | Carburetor, 4BBL | 1 | 1 |
| 12 | 30123 | Clip, Choke Rod Retaining | 1 | 1 |
| 13 | 30233 | Automatic Choke Assembly | 1 | 1 |
| 14 | 273513 | Screw & Washer Assembly, Choke | 1 | 1 |
| 15 | 179837 | Bolt, 3/8-16 x 3/4" Hex HD (GR5) | AR | AR |
| 16 | 103321 | Washer, 3/8 Medium Lock | AR | AR |
| 17 | 2000147 | Clamp, Dip Stick Support | 1 | 1 |
| 18 | 22410 | Tie Wrap; Nylon, 5 1/2 " Long | 3 | 3 |
| 19 | 30179 | Bolt, 3/8-16 x 1 1/4" Hex HD (GR5) | AR | AR |
| 20 | 444868 | Plug, 318 Hex Socket Pipe | 1 | 1 |
| 21 | 30221 | Gasket Kit, Intake Manifold | 1 | 1 |
| 22 | 30177 | Nipple; Thermostat By-Pass Hose, 1/2 MP x 3/4 Hose | 1 | 1 |
| 23 | 20226 | #12 Clamp Hose | 2 | 2 |
| 24 | 30178 | Hose, Thermostat By-Pass | 1 | 1 |
| 25 | 97845 | Fuel Line, Carter Pump to Carburetor | 1 | 1 |
| 26 | 30573 | Elbow; Inverted Flair, 3/8 Tube, to 1/4 Pipe, Male 90° | 1 | 1 |
| 27 | 186628 | Bolt; 3/8 -16 x 1 1/2 ", Hex Cap (GR8) | 2 | 2 |
| 28 | 97843 | Fuel Pump, Carter 454 | 1 | 1 |
| 29 | 91340 | Gasket, Fuel Pump | 1 | 1 |
| 30 | 30572 | Connector; Inverted Flair, 3/8 Tube, to 1/4 Pipe, Male | 2 | 2 |
| 31 | 97846 | Fuel Line, Filter to Carter Pump | 1 | 1 |
| 32 | 30135 | Push Rod, Fuel Pump | 1 | 1 |
| 33 | 181339 | Bolt, 5/16 - 24 x 1" Hex HD (GR5) | 2 | 2 |
| 34 | 97259 | Bracket, Fuel Filter | 1 | 1 |
| 35 | 97889 | Fuel Filter Assembly | 1 | 1 |
| 36 | 91606 | Cartridge, Fuel Filter | 1 | 1 |
| 37 | 30229 | Intake Manifold Assembly | 1 | 1 |
| 38 | 96818 | Stud; Carburetor, 5/16 - 18 x 4 1/4" | 1 | 1 |
| 39 | 97033 | Gasket, 4BBL Carburetor Mounting | 2 | 2 |
| 40 | 97122 | Wedge Plate | 1 | 1 |
| 41 | 96817 | Stud; Carburetor, 5/16-18 x 2 1/4", 12° Installation | 2 | 2 |
| 41 | 96480 | Stud; Carburetor, 5/16 -18 x 1 1/2", 0° Installation | 2 | 2 |
| 42 | 120361 | Nut; #10-24, Zinc Plated Hex | 4 | 4 |
| 43 | 106497 | Washer, #10 Medium Lock | 4 | 4 |
| 44 | 21033 | Clip, Shift Cable (Single Control) | 1 | 1 |
| 45 | 96750 | Strap, Lifting | 2 | 2 |
| 46 | 96633 | Bracket, Throttle Control | 1 | 1 |
| 47 | 97280 | Plate, Throttle Control | 1 | 1 |
| 48 | 443874 | Screw; 10-24 x 1/2" Hex HD, Machine | 4 | 4 |
| 49 | 33397 | Gasket; Ignition Timer, Distributor | 1 | 1 |
| 50 | 37061 | Distributor Assembly (Mallory) | 1 | 1 |
| 50 | 37067 | Distributor Breakerless (Prestolite) | ||
| 51 | 20799 | Clamp, Distributor Hold Down | 1 | 1 |
| 52 | 97948 | Bolt, Distributor Hold Down | 1 | 1 |
| 53 | 22401 | Tygon Tubing 3/8 O.D. x 1/4 I.D. | ||
| 30221 | Intake Manifold Gasket Kit | |||
| 20228 | Valve Grind Gasket Kit | |||
| 45334 | Carburetor Overhaul Kit 4 BBL | |||
| 45336 | Carburetor Gasket Kit 4 BBL | |||
| 22041 | Overhaul Gasket Kit | |||