1-1/4 inch Engine Flush Kit and Adaptor | Groco SSC-1250
1 1/4 in. SSC Series Engine Flush Kit
Hose ID 1 1/4 in.
NPT 1 1/4 in.
Length 4.55 in.
Overall weight 1.05 lbs
Add to the top of any seacock to allow instant emergency bilge pumping or to simplify winterization and cooling system flushing
In an emergency: While the connected engine is running close the seacock and remove the quick release plug. Excess bilge water will be pumped overboard by the engine raw water pump
For winterization: close the seacock remove the quick release plug and insert the service adapter
Anti freeze can be pumped into the cooling system
For system flushing:Close the seacock and insert the service adapter
Dockside water can be used to flush the cooling system with the engine running at idle speed
Magnesium anode for a 1994 OMC Cobra (SX-C) transom shield
Obtaining magnesium anodes to install on the OMC Cobra (SX-C) sterndrive, for fresh water use. Received the anode within a week of ordering the part, which is not going to be installed until Spring.