Sierra 116-250-2000-1 - 2 in. Water/Exhaust Hose, Per Foot
Sierra 116-250-2000-1 - 2 in. Water/Exhaust Hose, Per Foot
Sierra
161 in stock
Couldn't load pickup availability
Sierra 116-250-2000-1 — 2 in. Water/Exhaust Hose, Sold Per Foot
Sierra 116-250-2000-1 is a 2 in. marine water/exhaust hose with wire, sold by the foot so you only buy the length your run actually needs. Suited for engine intake, wet exhaust connections where bends or long lengths are required, bilge pump intake/discharge, and holding tank vent or pump-out lines. Black synthetic rubber tube and cover, reinforced with a wire helix embedded between plies of heavy duty synthetic cord for a hose that holds its shape through tight bends.
Part Specifications
- Sierra Part Number: 116-250-2000-1
- Type: Marine water/exhaust hose with wire, sold per foot
- Inside Diameter: 2 in.
- Outside Diameter: 2 13/32 in.
- Construction: Black synthetic rubber tube and cover, wire helix reinforced between plies of HD synthetic cord
- Resistance: Exhaust fumes, ozone, mild chemicals, antifreeze, salt water; abrasion and odor permeation resistant
- Temperature Range: -20°F to +200°F continuous, +250°F intermittent
- Applications: Engine intake, wet exhaust connections, bilge pump intake/discharge, holding tank vent/pump-out
Confirm Fitment Before Ordering
Not sure how much hose you need or whether 2 in. is the right diameter for your run? You can check the parts diagrams available on our website to help identify the correct part. Or, give us your engine model and application and we'll help you confirm before you order — by email, text, or live chat.
Additional Information
- Vendor: Sierra International (Shields Marine Hose)
- Part Number: 116-250-2000-1
Need a longer continuous run? The same hose is also available as a 50 ft coil, Sierra 116-250-2000.
Installation Notes
Install following the applicable marine exhaust and plumbing installation practices for your vessel, securing all connections with appropriate hose clamps.
Frequently Asked Questions
Q: How do I know how many feet I need?
A: Measure the full run including any bends, or send us your engine model and application and we'll help you estimate the right length — by email, text, or live chat.
Q: Can this hose be used for exhaust applications?
A: Yes, it's rated for wet exhaust connections, especially where bends or longer lengths are needed, in addition to water intake and pump plumbing.
Q: Why does this hose have a wire helix?
A: The embedded wire helix keeps the hose from collapsing or kinking through bends, which is important for exhaust and intake runs that aren't perfectly straight.
Q: Is this hose rated for both fresh and salt water?
A: Yes, it's resistant to salt water, antifreeze, and mild chemicals, along with exhaust fumes and ozone exposure.
Q: Is a longer pre-cut length available?
A: Yes, this same hose is also sold as a 50 ft coil under Sierra 116-250-2000 if you need a longer continuous run.
! Compatibility references are provided for informational purposes only and do not constitute a fitment guarantee. Part numbers, application listings, and "replaces" cross-references are based on manufacturer data and are intended as a starting point for identification — not a guarantee of fit for your specific engine, hull, or installation.
Buyer is solely responsible for verifying compatibility with their engine model, serial number, model year, and trim configuration before purchase. If you are unsure whether this part fits your application, contact MacombMarineParts.com before you buy — we're available via text, email, or online chat to help verify compatibility for your specific application.
MacombMarineParts.com is not liable for parts ordered based on assumed fitment. Returns due to buyer-selected incorrect fitment are subject to our standard return and restocking fee policies.