3M 36107 Perfect-It Gelcoat Medium Cutting Compound + Wax 1 Gallon | P1000 Scratch & Oxidation Removal with Durable Wax Finish for Marine & RV Gel Coat

3M 36107 Perfect-It Gelcoat Medium Cutting Compound + Wax 1 Gallon — 2-in-1 Formula Removes P1000 Scratches, Oxidation & Chalking and Leaves a Durable Wax Finish on Marine & RV Gel Coat

3M Perfect-It Gelcoat Medium Cutting Compound + Wax combines medium cutting power with durable wax protection in a single one-step formula for professional-grade gel coat compounding. Removes P1000 and finer scratches, oxidation, chalking, and water marks, then leaves a high-gloss wax finish that protects against weathering — and may not require a separate polishing step after use. Formulated specifically for marine and RV gel coat surfaces. The 1 gallon size is the professional shop volume for marine detailing operations, boat yards, and multi-vessel production work — same formula as the 1 qt retail size (3M-36106). Part of the 3M™ Perfect-It™ Gel Coat Finishing System.

Part Specifications

• Part Number: 3M-36107
• Size: 1 gallon
• Formula Type: 2-in-1 — medium cutting compound + durable wax in one step
• Cut Level: Medium compound cut
• Sand Scratch Removal: P1000 and finer
• Also Removes: Oxidation, chalking, water marks
• Finish: High-gloss, durable wax finish — may not require a separate polishing step
• Surface: Marine and RV gel coat
• Also Available: 1 qt retail size (3M-36106)
• System: Part of the 3M™ Perfect-It™ Gel Coat Finishing System

Perfect-It Gel Coat System — Where 36107 Fits

3M Perfect-It Gelcoat Medium Cutting Compound + Wax occupies the middle position in the Perfect-It gel coat finishing range — more cutting power than the cutting polish products, with the convenience of an integrated wax step. Understanding where it fits in the system helps select the right approach for the surface condition:

• Step 1 (heavy cut, no wax) — 3M Perfect-It Gelcoat Heavy Cutting Compound (3M-36102): Fastest cut in the Perfect-It gel coat line. Removes P800 and finer scratches and heavy oxidation. Use when gel coat has heavy oxidation or coarser sand scratches requiring maximum abrasive cut. Follow with a polish and wax step.
• 2-in-1 alternative — 3M Perfect-It Gelcoat Medium Cutting Compound + Wax (3M-36107 / 3M-36106) — this product: Medium compound cut + integrated wax in one step. Removes P1000 and finer scratches, oxidation, chalking, and water marks, then leaves a protective wax finish that may not require a separate polish step. Best suited for surfaces with moderate scratch and oxidation levels where a single 2-in-1 compound + wax step is sufficient. The 1 gallon (36107) is the professional shop volume; the 1 qt (36106) is the retail size.
• Finishing step (light cut + wax) — 3M Perfect-It Gelcoat Cutting Polish + Wax (3M-36105): Lighter cut for removing compound marks and fine scratches after a heavy compound step, combined with wax in one application. Use after 36102 in a two-step process.
• Wax only — 3M Perfect-It Boat Wax (3M-36113): Pure wax protection step with no compound cut. Use as the final step after compounding and polishing for maximum surface protection.

The 36107 is ideal for boat yard and production detailing operations where moderate gel coat correction and wax protection are needed at volume. The integrated wax step reduces the number of product passes required per vessel — compound and protect in one step rather than two separate operations.

Application Notes

• Apply by machine (DA or rotary polisher) with a foam compounding or polishing pad for best results in production work; hand application is also possible for smaller areas and spot work
• Work in overlapping passes in manageable sections; medium compound cut removes P1000 scratches and oxidation — avoid over-working any single area
• Allow the compound to work fully before wiping — the formula leaves a wax finish as the compound breaks down; buff with a clean microfiber towel to reveal the high-gloss wax surface
• After buffing, inspect the surface under adequate lighting — the wax finish left by this product may be sufficient without a separate polish step depending on surface condition and gloss expectations
• If a separate finishing polish step is desired after compounding, follow with 3M Perfect-It Gelcoat Cutting Polish + Wax (3M-36105) before applying a standalone wax
• Avoid application in direct sunlight or on hot gel coat surfaces — heat accelerates drying and shortens working time
• Safe for marine and RV gel coat surfaces

Additional Information

• Vendor: 3M
• SKU: 3M-36107
• Product Type: Boat & Engine Maintenance / Buffing Compound / Marine Wax
• Size: 1 gallon
• Country of Origin: USA
• Note: This item does not qualify for free shipping due to size/weight. Shipping rates apply at checkout.
• HS Code: 3405.90 (polishing and protective preparations — verify for your import classification)

Frequently Asked Questions

Q: What is the difference between the 1 gallon (3M-36107) and 1 qt (3M-36106)?
A: Same formula — different sizes. The 1 gallon (36107) is the professional shop volume suited for marine detailing operations, boat yards, and multi-vessel production work where the 1 qt would require frequent replenishment. The 1 qt (36106) is the standard retail size for individual boat owners and lower-volume use. The 1 gallon offers better cost-per-oz value for high-volume applications.

Q: What is the difference between 3M-36107 (Medium Compound + Wax) and 3M-36102 (Heavy Cutting Compound)?
A: 36102 is the heaviest-cut compound in the Perfect-It gel coat line — it removes P800 and finer scratches and heavy oxidation, but contains no wax and requires a separate polish and wax step after compounding. 36107/36106 is a medium-cut compound with integrated wax — it removes P1000 and finer scratches and moderate oxidation, and leaves a protective wax finish in the same step, which may not require a separate polish. Choose 36102 when gel coat is heavily oxidized or has coarser sand scratches; choose 36107 for moderate surface conditions where a single compound + wax step is sufficient.

Q: Does this product eliminate the need for a separate wax step?
A: In many cases, yes. The formula leaves a durable wax finish on the surface after buffing that may not require a separate polishing or wax step — particularly when the surface condition is moderate and a high-gloss finish has been achieved after compounding. For maximum gloss quality or a final show-grade protective layer, a follow-up with 3M Perfect-It Boat Wax (3M-36113) can be added after this product.

Q: What defects will this product remove from gel coat?
A: P1000 and finer sand scratches, oxidation, chalking, and water marks. The medium compound cut handles moderate-depth defects. For heavier oxidation, deeper P800 scratches, or significant surface defects that exceed the capability of a medium compound, use 3M Perfect-It Gelcoat Heavy Cutting Compound (3M-36102) as a first step.

Q: Is this product suitable for RV gel coat as well as marine gel coat?
A: Yes — 3M Perfect-It Gelcoat Medium Cutting Compound + Wax is formulated for both marine and RV gel coat surfaces. Gel coat is the same polyester-based surface material regardless of whether it is used on a fiberglass boat or an RV, and this formula is designed to work on both. The 1 gallon size is particularly suited for RV detailing shops and fleet maintenance operations where larger volumes are consumed.