BRP 0763792 - Power Pack for Johnson/Evinrude V6 Outboard
BRP 0763792 - Power Pack for Johnson/Evinrude V6 Outboard
Bombardier Recreational Products
Low Stock: 1 left
Couldn't load pickup availability
BRP 0763792 — Power Pack for Johnson/Evinrude V6 Outboard
The power pack is the heart of the capacitor discharge ignition system on your Johnson or Evinrude V6 outboard, generating and delivering the high-voltage charge to the ignition coils that fires each cylinder. When it fails, you're either dead in the water or chasing an intermittent misfire that gets worse as the engine warms up. BRP 0763792 is the correct OEM replacement power pack for 1985 V6 Johnson and Evinrude outboards, replacing both the original OMC 582651 and CDI Electronics 113-2651.
Part Specifications
- BRP Part Number: 0763792
- Type: Power pack (CDI module)
- Application: Johnson & Evinrude V6 outboards, 1985
- Replaces: OMC/Johnson/Evinrude 582651; CDI Electronics 113-2651
Confirm Fitment Before Ordering
Not sure this power pack matches your engine? You can check the parts diagrams available on our website to help identify the correct part. Or, give us your engine model and serial number and we'll confirm it for you before you order — by email, text, or live chat.
Additional Information
- Vendor: BRP (Bombardier Recreational Products)
- Part Number: 0763792
- OEM Cross-Reference: Replaces OMC 582651, CDI 113-2651
Installation Notes
Install following the applicable Johnson/Evinrude V6 outboard service manual, and it's worth testing the stator and trigger assembly at the same time since a weak stator can shorten a new power pack's life.
Frequently Asked Questions
Q: How do I know if my power pack has failed?
A: Check for spark at each cylinder using an inline spark tester while cranking. No spark on multiple cylinders, or spark that fades as the engine warms up, points to the power pack, especially once coils, stator, and trigger have already tested good.
Q: What exactly does the power pack do?
A: It's the control unit for the capacitor discharge ignition system, receiving trigger signals, charging capacitors from the stator, and discharging that energy through the ignition coils to fire each cylinder at the right moment.
Q: Will this fit my specific engine?
A: BRP 0763792 fits Johnson and Evinrude V6 outboards from 1985. Send us your engine model and serial number and we'll verify fitment before you order.
Q: Can I replace the power pack myself?
A: Yes, it's a straightforward swap for anyone comfortable with basic outboard electrical work, mounting with a few bolts and a multi-pin harness connector. Follow your service manual for the correct procedure and torque specs.
Q: Should I replace anything else at the same time?
A: It's worth testing the stator and trigger assembly before reinstalling, since a weak stator or erratic trigger can cause premature power pack failure and lead to a repeat repair.
! Compatibility references are provided for informational purposes only and do not constitute a fitment guarantee. Part numbers, application listings, and "replaces" cross-references are based on manufacturer data and are intended as a starting point for identification — not a guarantee of fit for your specific engine, hull, or installation.
Buyer is solely responsible for verifying compatibility with their engine model, serial number, model year, and trim configuration before purchase. If you are unsure whether this part fits your application, contact MacombMarineParts.com before you buy — we're available via text, email, or online chat to help verify compatibility for your specific application.
MacombMarineParts.com is not liable for parts ordered based on assumed fitment. Returns due to buyer-selected incorrect fitment are subject to our standard return and restocking fee policies.