Ballast Pump for MasterCraft 300249, 12 Volt | Jabsco 18670-9407

Replacement Ballast Pump for MasterCraft 300249, 12 Volt | Jabsco 18670-9407

Jabsco designed this pump specifically for MasterCraft Boat Company to meet the high-flow, continuously rated, demands that their wakesurfing, wakeboarding, and ski boats require ballast pumping. This pump is equipped with the same wire protection and heavy duty disconnect wire connector as the MasterCraft ballast pump 300249.

• 8.4 GPM (at 10 feet of head)
• 12 Volt DC Operation
• 20 Amp fuse recommended
• Rated for continuous duty
• Self-Priming up to 8 feet
• Outside of ports accept 1 Inch inside diameter hose
• Ports feature 1/2 inch female NPT
• For best results use with 1 inch inside diameter hose. Do not use with hose that has an inside diameter smaller than 3/4 Inch.
• 7-1/8" Long x 4-3/4" Wide x 3-1/2" High
• Ignition Protected: Complies with USCG 183.410 and ISO 8846
• Complies with ISO 8849 bilge pump standards
• Debris presents no problem to this bronze bodied, flexible impeller design
• Equipped with a green Run Dry Impeller (6303-0007-P)
• Equipped with the same wire protection and heavy duty disconnect wire connector as MasterCraft ballast pump 300249
• Direct plug and play replacement for MasterCraft 300249