Rack And Pinion Steering Kit 13Ft | SeaStar SS14113

Rack And Pinion Steering Kit 13Ft | SeaStar SS14113

SeaStar 13 ft. Rack and Pinion Steering Kit | SS14113

Back mount rack and pinion marine steering kits include everything needed to replace the steering of single-station boats with a single power-assisted sterndrive or inboard engine.

• Back mount rack steering kit is designed for use with stern drives, inboards and other power assisted applications
• Precise 4 turns lock to lock
• Kit includes 13 foot cable, helm, bezel and hardware
• Standard 3/4 inch tapered shaft
• Stainless steel cable output ends
• For single station use only
• Meets ABYC standards
• Meets NMMA certification requirements
• Replaces Seastar Solutions SSC12413

SeaStar Solutions SS141xx Back Mount Rack Steering System

Traditional SeaStar Solutions (formerly Teleflex Marine) mechanical rack steering is still the choice for sterndrives, inboards and other power-assisted applications. It's just right for power-steered boats in which No-Feedback Systems are not Required.

The Back Mount Rack Steering System features the precision and comfort of four turns lock-to-lock with a cable and helm that install easily from behind the dash. In single cable configurations, this is the best 4-turn choice for power-steered boats.

Suitable For:

- Virtually all Power-Assisted Sterndrive and Inboard Boats with Wheels up to 16-inch Diameter.

- SS141xx Replaces 1984 and Newer SeaStar Solutions 'The Rack' Steering without dash modification (Requires use of SSC134xx Back Mount Rack Cable Enclosed).

Kit Contains the Following:

(1) SH5210P Helm; (1) SB39526P 90 Degree Bezel Kit; (1) SSC134xx Steering Cable; Hardware and Instruction Sheets.

Note: This System is for Single Station use ONLY. Components are available for Dual Cable Systems, but we Recommend No Feedback (NFB) Steering for all Dual Cable Steered, Non-Power Assisted Outboards. This System is only recommended as a replacement for the original system as installed by the boat manufacturer. SeaStar Solutions always recommends NFB Helms for Outboard Applications.