U-joint Bellow GEN I Bell Housing | SEI 9A-108-02K

U-joint Bellow GEN I Bell Housing | SEI 9A-108-02K

U-joint Bellow GEN I Bell Housing | SEI 9A-108-02K

Replaces OMC 775540 | Replaces Quicksilver 60932A4 | Replaces Sierra 18-2751

The U-joint Bellow: This bellow is attached from the bell housing to the transom plate. It is designed to protect the u-joints and drive shaft that connects to the engine coupler. If water gets into the u-joint bellow it can cause failure of the u-joints, gimble bearing and even the outdrive itself. Here are a few symptoms of u-joint bellows failure.

• Water in the gear lube.
• Water leaking into the boat.
• Growling Noise coming from the back of the boat.

All products sold by Sterndrive Engineering (“SEI”) are warranted for either a period of one (1) year or three (3) years from the date of actual purchase. A condition precedent to the enforcement of these warranties is proof of purchase of the SEI product. Satisfactory evidence of purchase must be supplied by customer prior to receiving warranty benefits hereunder. These one (1) year and three (3) year warranties against defects in material and workmanship are the sole and exclusive warranty provided by SEI and all other warranties and potential damages are limited and excluded hereunder, as set forth below. These warranties commence on the shipment date of products sold by SEI to purchaser or upon the date of purchase from a properly authorized SEI dealer to its customer.

Brunswick Corporation is the Original Equipment Manufacturer (OEM). Sterndrive Engineering, Inc. (or SEI) has no affiliation with the Brunswick Corporation. Sterndrive Engineering, Inc. manufactures a stern drive designed to replace Mercury Marine's MerCruiser, Alpha One, R, MR, and Gen II stern drives. MerCruiser, Alpha One, Gen II, R, and MR are trademarks of the Brunswick Corporation. As with any after-market product, any warranties governing products manufactured and/or sold by Brunswick Corporation will not apply to products manufactured and/or sold by Sterndrive Engineering, Inc. (or SEI) or to products damaged due to the operation of an SEI product.